Showing 1–16 of 33 results
Electric Power Unit, 240 volt single phase power
Provides performance virtually the same as the AMKUS Ultimate system.
Two tools can be connected and operated simultaneously
Can be used with hose lengths up to 200’
Complete on-board circuit panel for: individual motor and circuit activation, LED circuit status display, LCD display for operational diagnostics, integrated low oil warning and low oil shutdown
Uses AMKUS Non-toxic mineral base hydraulic fluid
Optional wireless remote control with emergency shut down
Add to quote
The 10″ extension allows you to extend the reach of any of the four different AMKUS Ram sizes.
Add to quote
Combination Tool Chain Package
For AMK-25C or AMK-C-15 Combination tools
Includes: (2) seven foot chains with hook on one end and combination tool chain shackle on the other end.
Add to quote
EN 13204 Designation: AC132D-15.9
110,000 lbs cutting force
Rotating handle
Cuts Boron and other exotic metals
Add to quote
EN 13204 Designation: AC127F-20.9
Designed to handle the advanced high strength steels in new model vehicles, not just NFPA
Boron
Martensite
Ultra High Strength Steels
Over 200,000 lbs of cutting force
Add to quote
Combination cutting/spreading/pulling tool
Extremely lightweight, compact size for easy storage
Ideal for “first response” applications
Anodized for corrosion protection
Check valve design maintains load
Available with D-ring handle
Convert a Model AMK-25C Combination Tool to any Model 25 Cutter with genuine AMKUS blades
Add to quote
Long blade and wide opening covers the need for continuous cutting such as: “B” & “C” posts, third doors and roofs
Designed for racing but lends itself to everyday vehicle rescue
Convert to a Special Application Cutter with Genuine AMKUS Blades
Add to quote
Extremely compact, powerful and versatile
Proven design – thousands in use worldwide
Capable of automotive cutting requirements
Anodized for corrosion protection
Available with D-ring handle
Convert to a Special Application Cutter with Genuine AMKUS Blades
Add to quote
Combination cutting/spreading/pulling tool
Well balanced and easy to use
Check valve design maintains load
Anodized for corrosion protection
Equipped with D-ring handle
Add to quote
Electric powered, 3.0 H.P., Washdown motor
Two high pressure, 2-stage pumping systems
Two 2-way, 2-position selector valves
Two tools can be connected and operated simultaneously
Non-toxic mineral based hydraulic fluid
Roll cage for protection and one hose loop for storage
220/240 volt single phase
Part No. 711201531040
Electric Specifications
Also available with a carrying handle (Model EF2S-STD)
Add to quote
Quick connect couplings on one end only. Hoses may be easily connected and disconnected from the power unit.
(Quick connect couplings required on power unit for extension hose use.)
Available in either 20′ or 30′ lengths
Available in red, blue, black and yellow.
EN 13204 Designation: MTO
Part No. 701203512040
Gasoline powered Briggs & Stratton™ overhead valve, 4 cycle engine
Uses lead free gasoline
Two high pressure, 2-stage pumping systems
Two 2-way, 2-position selector valves
Two tools can be connected and operated simultaneously
Non-toxic mineral based hydraulic fluid
Roll cage for protection and one hose loop for storage
Also available with carrying handle (Model GB2S-STDO)
Add to quote
EN 13204 Designation: ATO
Part No. 701205516201
Uses lead free gasoline
High pressure, 2-stage pumping system
4-way, 3-position selector valve
Two tools can be connected simultaneously
Alternate tool operation
Non-toxic mineral based hydraulic fluid
Includes spark arresting muffler
Easy access drain port to drain hydraulic fluid from pump
Roll cage for protection
Also available with a carrying handle (Model GH2A-MCH)
Optional Quick Connect Coupling, Part No. 792200001041
Add to quote
Gas powered Honda® engine
Two tool simultaneous operation
Increased first stage pressure reduces cycle times
“BOOST” mode. When in alternate tool operation, increases tool speed in both pump stages
Newly designed 3-position control valves
Direct mounted Standard Couplings or single connection Mono Couplings
Modular design reduces time required for service
Add to quote
EN 13204 Designation: MTO
Part No. 70120G512050
Gasoline powered Honda ® 4 cycle engine
Uses lead free gasoline
Two high pressure, 2-stage pumping systems
Two 2-way, 2-position selector valves
Two tools can be connected and operated simultaneously
Non-toxic mineral based hydraulic fluid
Roll cage for protection and one hose loop for storage
Also available with carrying handle (Model GH2S2-STD
Add to quote
Available with 50′ or 100′ of hose
Available in Electric or Manual
Available with Standard Couplings or Mono Couplings
Electric motor can be mounted on any lower corner of the reel to allow nesting of reels and save compartment space
Reinforced hose reel drum will protect it from becoming damaged and increase the life of your hose reel.
Hose crimp protector guards the hose from the effects of pressurized hoses squeezing and putting stress on the hose connection.